Stitch-and-glue construction, along with the development of epoxy and modern mahogany marine plywood, has revolutionized and revitalized wooden boat building. this method of building is not only stronger, lighter, and faster than traditional wooden boat building, but it also takes far less skill. with stitch-and-glue construction, no strongbacks, forms, or temporary frames are required to. The devlin “stitch and glue” method is a superior way to build a wooden boat. it has been developed and refined here at devlin designing boat builders for almost 40 years, and has been adopted by other segments of the wooden boat industry.. Stitch and glue is a simple boat building method which uses plywood panels stitched together, usually with copper wire, and glued together with epoxy resin. this type of construction can eliminate much of the need for frames or ribs..
The third video in the how-to build a boat series covers the assembly of the hull using zip ties with the stitch and glue method. this construction method can be used for other boats and wood. Stitch and glue boat building is a quick and fun way to build boats using shaped plywood panels to build strong, lightweight boats. paddleboards, skiffs, rowboats, sailboats, and powerboats can be. The stitch and glue boatbuilding method is an easy way for a beginner to make a plywood boat. in a nutshell stitch and glue boatbuilding has 4 major steps. plywood parts of the boat are measured and cut according to plans. small holes are made around the edges of the pieces..
